Wilson Combat 190 UltraLight Match Trigger 1911

Elevate Your 1911's Performance: The Wilson Combat Ultralight Match Trigger

For discerning 1911 pistol owners, competitive shooters, and professional gunsmiths, optimizing every component for peak performance is paramount. The trigger, as the primary interface between shooter and firearm, holds immense importance in achieving precision, speed, and consistency. Enter the Wilson Combat 190F Ultralight Match Trigger, an ambidextrous, matte silver finished masterpiece meticulously engineered to transform your 1911's shooting experience. This isn't just an upgrade; it's a foundational enhancement for those who demand the absolute best from their custom 1911 Auto.

What problems does a superior trigger solve?

• Inconsistent Trigger Pulls: A stock trigger can often exhibit grit, creep, or an unpredictable break, making consistent accuracy challenging.
• "Trigger Bounce" or Hammer Follow: Especially problematic with lighter trigger pulls, this phenomenon can lead to an unsafe firearm and hinder rapid, reliable follow-up shots.
• Suboptimal Ergonomics: A trigger that doesn't fit the shooter's hand or preference can lead to fatigue and reduced control.
• Slow Reset Times: A long or vague reset can impede rapid firing and split times in competitive scenarios.
• Lack of Precision Adjustment: The inability to fine-tune pre-travel and overtravel limits the gunsmith's ability to achieve a truly crisp, clean break.

The Wilson Combat Ultralight Match Trigger directly addresses these critical issues, providing a tangible pathway to enhanced shooting prowess.

The Philosophy Behind the Ultralight Design: Eliminating "Trigger Bounce"

One of the most innovative aspects of the Wilson Combat Ultralight Match Trigger is its skeletonized design, specifically engineered to combat "trigger bounce." But what exactly is trigger bounce, and why is it so detrimental?

Trigger bounce occurs when the trigger is pulled rapidly or with a very light pull weight, causing the trigger itself to "bounce" forward slightly after the shot is fired. This momentary forward movement can lead to several undesirable outcomes:

• Premature Sear Disengagement: In extreme cases, it can allow the sear to release the hammer before the disconnector has fully reset, potentially leading to an unintended double-tap or even an out-of-battery discharge, a significant safety concern.
• Inconsistent Ignition: While less dangerous, trigger bounce can contribute to inconsistent ignition due to the disruption of the trigger system's delicate balance.
• Degradation of a Fine Trigger Job: For a meticulously tuned 1911 trigger, trigger bounce introduces unnecessary stress and wear on internal components, shortening the lifespan of a perfectly adjusted mechanism.

By precisely machining the trigger pad with a three-hole skeletonized design, Wilson Combat dramatically reduces the trigger's overall mass. This reduction in weight minimizes the inertia that causes bounce, ensuring that even with a very light trigger pull, the system remains stable, safe, and utterly reliable. This meticulous attention to detail is why the Wilson Custom Shop, renowned for producing some of the world's finest 1911 Autos, exclusively utilizes this trigger in their high-performance builds.

Uncompromising Materials and Precision Engineering

The integrity and performance of any firearm component are directly tied to the materials and manufacturing processes employed. The Wilson Combat Ultralight Match Trigger exemplifies this principle through its premium construction:

• Aircraft-Grade Aluminum Flat Pad: The flat trigger pad is machined from high-strength, lightweight aircraft-grade aluminum. This material choice offers the ideal balance of rigidity and minimal weight, contributing to the ultralight characteristic while ensuring durability and a solid feel. The flat face provides consistent finger placement, preferred by many competitive shooters for enhanced control and a perception of a lighter pull weight.
• Hardened Stainless Steel Bow: The trigger bow, the part that travels within the frame and interacts with the disconnector and sear, is crafted from hardened stainless steel. This choice of material is crucial for its resistance to wear and its ability to maintain its precise dimensions over countless cycles.
• Polished Bow for Reduced Friction: Further enhancing the trigger's smoothness, the stainless steel bow is meticulously polished. This high-polish finish significantly reduces "bow to frame friction." Less friction translates directly to a smoother, more consistent trigger pull, eliminating grittiness and contributing to a sensation of effortless movement. This reduction in drag is a key factor in achieving that coveted "glass rod break" feel.

Precision Adjustment for the Discerning Shooter

A truly custom trigger experience requires the ability to fine-tune its performance to individual preferences and specific shooting disciplines. The Wilson Combat Ultralight Match Trigger includes an adjustable overtravel screw (a 6-32 x 5/16" set screw and a 1/16" Allen wrench are included for adjustment).

• What is Overtravel? Overtravel refers to the distance the trigger continues to move rearward after the hammer has fallen and the shot has been fired.
• Why Adjust Overtravel? Excessive overtravel can cause the shooter's finger to move more than necessary, potentially disturbing the sight picture or causing anticipation, especially in precision shooting. By minimizing overtravel to the absolute minimum required for reliable function, the trigger reset becomes shorter, and the overall trigger stroke is optimized, leading to:
  • Faster Follow-Up Shots: A shorter overtravel means less wasted motion, allowing the trigger to reset more quickly for subsequent shots.
  • Improved Accuracy: Reduced trigger movement after the break helps maintain aim and concentration.
  • Enhanced Feel: A precisely adjusted overtravel contributes significantly to a crisp, clean trigger break and a rapid, tactile reset.

While the trigger is designed for precision, it's important to note that minor fitting is required. This isn't a drop-in part for every 1911; it's a component designed for ultimate customization. A competent pistolsmith can expertly fit this trigger to your 1911, ensuring optimal function, safety, and a trigger pull perfectly tailored to your shooting needs, whether for competitive use or self-defense. The inherent adjustability combined with professional fitting allows for a trigger pull that is safely adjusted to meet your specific requirements, providing a distinct advantage for any application.

Ambidextrous Design and Versatile Applications

The design of the Wilson Combat Ultralight Match Trigger is inherently ambidextrous, making it suitable for both right-handed and left-handed shooters without compromise. This universal compatibility ensures that any 1911 owner can benefit from its superior performance.

Who benefits most from this trigger upgrade?

• Competitive Shooters (USPSA, IPSC, IDPA): The reduced trigger bounce, short reset, and crisp break are critical for achieving faster split times and maintaining accuracy under pressure. The flat pad is a popular choice among competitors for its consistent feel.
• Precision Target Shooters: The ability to finely tune overtravel and the overall smoothness of the pull aid in minute-of-angle (MOA) accuracy.
• Concealed Carry (CCW) Holders: While light triggers require more training for carry, the safety benefits of eliminated trigger bounce, combined with a clean, predictable break, can enhance control and confidence in high-stress situations (when fitted by a professional to a safe pull weight).
• Custom 1911 Builders and Enthusiasts: Those embarking on a custom 1911 project or seeking to extract every ounce of performance from an existing model will find this trigger an essential component.

The Wilson Combat Legacy: A Mark of Excellence

Wilson Combat has been a venerable name in the firearms industry for decades, synonymous with innovation, quality, and performance in 1911 pistols and components. Their reputation is built on a commitment to precision engineering and exhaustive testing. When you choose a Wilson Combat part, you are investing in a component that has been proven in the most demanding environments, trusted by professional shooters, and refined by master gunsmiths. This trigger is a testament to that legacy, embodying the very essence of reliability, accuracy, and superior craftsmanship.

In summary, the Wilson Combat 190F Ultralight Match Trigger in Matte Silver Finish for 1911 Ambidextrous pistols is more than just a replacement part. It is a performance enhancer designed to provide:

• A truly ultralight trigger feel due to its reduced mass.
• Elimination of dangerous "trigger bounce" for enhanced safety and consistency.
• A smooth, grit-free pull thanks to a polished stainless steel bow.
• Pinpoint precision adjustment of overtravel for optimal trigger break and reset.
• The ergonomic advantage of a flat-faced trigger pad for consistent finger placement.
• The peace of mind that comes with using a component from a renowned industry leader like Wilson Combat.

Upgrade your 1911 and unlock its true potential. With the Wilson Combat Ultralight Match Trigger, every shot becomes a testament to precision and control.

Product Specifications: Wilson Combat 190F Ultralight Match Trigger