How do I speed up my reloading process without sacrificing accuracy?

By using the RCBS Quick Change Metering Cylinder, you can eliminate the need to re-adjust your powder measure for each caliber or powder type, drastically reducing setup time. Since your precise powder charge settings are locked into each dedicated cylinder, you maintain uncompromising accuracy while streamlining your workflow and increasing output.

Is there an easy way to switch between rifle and pistol powders?

Absolutely. With dedicated RCBS Quick Change Metering Cylinders, you can easily switch between rifle and pistol powders. Different powders have varying densities and flow characteristics, making fine-tuning a single system cumbersome. With these cylinders, you can have one optimized for a fine-grained pistol powder and another for a bulkier rifle powder, ready to swap instantly.

How can I ensure my powder charges are always consistent?

Dedicating a specific RCBS Quick Change Metering Cylinder to a particular powder and caliber helps maintain extreme consistency. Once the optimal setting is found, it's locked into that cylinder, reducing the variability that can arise from repeated manual adjustments. This contributes directly to improved ballistic performance and safer handloads.

What tools do I need to get started with the RCBS Quick Change Metering Cylinder?

To get started, you will primarily need an RCBS Uniflow Powder Measure (or a compatible RCBS powder measure body) and the RCBS 98845 Quick Change Metering Cylinder itself. No special tools are required for the cylinder's swapping mechanism beyond your standard reloading equipment, as it's designed for tool-free installation and removal.

RCBS 98845 Quick Change Metering Cylinder Multi-Caliber

Q: How can I make my reloading sessions more efficient?

The RCBS Quick Change Metering Cylinder significantly cuts down on setup time by eliminating the need to re-adjust your powder measure for each caliber or powder type. This allows for more time spent producing ammunition and less time on tedious adjustments, all while maintaining accuracy as your settings are preserved.

Q: What is the best way to handle multiple calibers on one powder measure?

The RCBS Quick Change Metering Cylinder is designed for multi-caliber versatility. It allows you to quickly swap entire cylinders, each pre-set for a specific powder charge, for different calibers or powder types without resetting your powder throw. This means a single RCBS powder measure body can efficiently service a wide range of calibers by simply changing the cylinder.

Description

Unlocking Reloading Efficiency: The RCBS Quick Change Metering Cylinder Multi-Caliber

Are you a dedicated reloader constantly seeking ways to enhance the precision and speed of your ammunition production? Do you find yourself frustrated by the time-consuming process of changing powder settings and recalibrating your powder measure when switching between different calibers or propellants? For any handloader, from the casual hobbyist to the competitive shooter striving for sub-MOA groups, optimizing the reloading workflow is paramount. The challenge often lies in maintaining exacting powder charge consistency while minimizing the downtime associated with equipment adjustments.

This is precisely where the RCBS 98845 Quick Change Metering Cylinder Multi-Caliber emerges as an indispensable tool. It's not just another accessory; it's a foundational component designed to revolutionize how you manage your powder dispensing, ensuring both uncompromised accuracy and unprecedented efficiency. This innovative cylinder is engineered to solve the common pain points of powder measure adjustments, making it easier than ever to switch between your favorite rifle and pistol calibers without losing your meticulously dialed-in settings.

What is the RCBS Quick Change Metering Cylinder and Who Needs It?

At its core, the RCBS Quick Change Metering Cylinder is an interchangeable component for popular RCBS powder measures, specifically the RCBS Uniflow Powder Measure and its derivatives. Its primary function is to store a pre-set powder charge setting, allowing reloaders to quickly swap cylinders for different powders or calibers without the need to reset their powder throw.

This product is ideal for:

Multi-Caliber Reloaders: If your reloading bench serves a diverse arsenal of firearms—from 9mm pistols to .308 Winchester rifles—this cylinder eliminates the repetitive adjustment of a single metering unit.
Precision Shooters: Competitive shooters and long-range enthusiasts who demand extreme consistency in their powder charges will appreciate the ability to dedicate a specific cylinder to a favorite powder and caliber combination, ensuring settings remain untouched.
Efficiency Seekers: Those looking to maximize their output during reloading sessions, whether for high-volume practice ammunition or limited runs of match-grade cartridges, will benefit from the drastic reduction in setup time.
Experimenters: If you frequently test different powders for a given caliber, these quick-change cylinders allow you to save multiple settings, facilitating rapid comparison and analysis of ballistic performance.
Anyone Using RCBS Uniflow Powder Measures: This cylinder is specifically designed to integrate seamlessly with the robust and widely trusted RCBS Uniflow Powder Measure system.

Key Features and Their Real-World Benefits

The RCBS 98845 Quick Change Metering Cylinder is packed with features that directly address the needs of serious reloaders:

Pre-Set Powder Charge Retention: This is arguably the most significant advantage. Each cylinder can be dedicated to a specific powder charge for a particular caliber. Once you've achieved your desired powder throw (e.g., 24.0 grains of Varget for your .223 Remington loads), that setting is locked into that specific cylinder. When you switch to, say, 5.0 grains of Unique for your 9mm loads, you simply swap the entire metering cylinder, and your .223 setting remains untouched and ready for your next session. This eliminates guesswork and significantly reduces the potential for errors that can arise from repetitive adjustments.
Tool-Free Swapping: Designed for user convenience, the RCBS Quick Change Metering Cylinder can be swapped in and out of your RCBS powder measure without the need for any tools. This snap-in, snap-out functionality means less time fumbling with wrenches and more time producing consistent ammunition. This ease of use translates directly into more productive reloading sessions.
Multi-Caliber Versatility: As the name suggests, this cylinder is inherently "multi-caliber" in its application. While a single cylinder is used for one specific powder charge setting, the fact that you can have multiple of these cylinders means your single powder measure body can service an entire range of calibers and powder types. This extends the utility of your existing RCBS equipment dramatically.
Durable RCBS Construction: Built to the exacting standards RCBS is known for, these metering cylinders are constructed from high-quality materials designed to withstand the rigors of frequent reloading. This ensures a long lifespan and consistent, reliable performance over thousands of powder throws. The robust design means less wear and tear, maintaining precision over time.
Compatibility with RCBS Uniflow: This cylinder is engineered to be a perfect fit for the RCBS Uniflow Powder Measure, a staple on many reloading benches. Its compatibility ensures a secure fit and smooth operation, leveraging the accuracy and reliability of the Uniflow system.
Consistent Powder Throws: While the cylinder itself holds the setting, the precision of the RCBS Uniflow measure it integrates with, combined with the dedicated nature of the quick-change cylinder, contributes to highly consistent powder throws. Achieving powder charge consistency within +/- 0.1 grain is often achievable with a properly calibrated setup, which is critical for peak accuracy and safe ammunition.
Streamlined Workflow: Imagine this scenario: you're loading .30-06 Springfield rifle ammunition. You finish your batch and need to load some .45 ACP pistol rounds. Instead of emptying your powder measure, resetting the micrometer, throwing test charges, and then finally getting back into production, you simply swap the .30-06 cylinder for your pre-set .45 ACP cylinder. The powder measure is ready to go in seconds. This transformation of your workflow is invaluable.

Addressing Common Reloading Questions

Many reloaders ask: "How can I make my reloading sessions more efficient?" or "What's the best way to handle multiple calibers on one powder measure?" The RCBS Quick Change Metering Cylinder is a direct answer to these questions.

"How do I speed up my reloading process without sacrificing accuracy?" By eliminating the need to re-adjust your powder measure for each caliber or powder type, the RCBS Quick Change Metering Cylinder significantly cuts down on setup time. This means more time spent actually producing ammunition and less time on tedious adjustments. Your accuracy is maintained, as your settings are preserved.
"Is there an easy way to switch between rifle and pistol powders?" Absolutely. Different powders have varying densities and flow characteristics. Trying to fine-tune a single metering system for drastic changes in powder type can be cumbersome. With dedicated quick-change cylinders, you can have one optimized for a fine-grained pistol powder and another for a bulkier rifle powder, ready to swap at a moment's notice.
"How can I ensure my powder charges are always consistent?" Dedicating a specific quick-change cylinder to a particular powder and caliber helps to maintain extreme consistency. Once the optimal setting is found, it's locked in. This reduces the variability that can creep in with repeated manual adjustments, contributing directly to improved ballistic performance and safer handloads.
"What tools do I need to get started with this?" You'll primarily need an RCBS Uniflow Powder Measure (or a compatible RCBS powder measure) and of course, the RCBS 98845 Quick Change Metering Cylinder. No special tools are required for the cylinder itself beyond your standard reloading equipment.

The Value Proposition: Why Invest in Multiple Cylinders?

While one RCBS Quick Change Metering Cylinder provides the core functionality, the true power and efficiency gain come from acquiring multiple cylinders. Consider the advantages:

Dedicated Settings for Every Load: Imagine having a cylinder for your favorite .223 load, another for your competition 9mm, one for your hunting .30-06, and perhaps another for a specific magnum pistol load. Each is pre-set, saving you countless minutes and potential errors.
Increased Productivity: For a small investment, you can drastically increase the number of rounds you produce per hour by reducing changeover time to mere seconds. This is especially valuable for high-volume handgun ammunition production or when working on multiple projects concurrently.
Enhanced Organization: Labeling each cylinder with its corresponding powder and charge weight helps organize your reloading bench and ensures that you always pick up the correct setting for your desired load.
Preserving Settings: If you often reload in batches, but not all at once, having a dedicated cylinder means you can put your powder measure away and pick it up weeks later, knowing your setting is precisely where you left it. No need to recalibrate or throw test charges again.
Long-Term Savings: While there's an initial outlay for additional cylinders, the time saved and the reduced potential for wasted powder (due to re-adjustments and test throws) can add up over time. More importantly, the consistency you achieve with dedicated settings can lead to more accurate ammunition, which often translates to better performance in the field or on the range.

Topical Authority: Trusting RCBS for Reloading Excellence

RCBS has been a cornerstone of the reloading community for decades, synonymous with quality, innovation, and reliability. Their equipment is found on reloading benches worldwide, from professional ammunition manufacturers to basement hobbyists. The RCBS 98845 Quick Change Metering Cylinder embodies this legacy:

Engineered for Precision: RCBS products are designed with an understanding of the critical tolerances involved in ammunition manufacturing. The quick-change cylinder is no exception, ensuring a snug fit and consistent powder flow.
Robust Design: Reloading equipment endures significant stress. RCBS builds its components to last, using materials that resist wear and maintain their integrity even after thousands of cycles.
Proven Reliability: When you choose RCBS, you're investing in a system that has been field-tested and proven by generations of reloaders. The Uniflow powder measure, which this cylinder enhances, is a testament to RCBS's commitment to dependable performance.
User Outcomes: Reloaders using RCBS Quick Change Metering Cylinders consistently report improvements in efficiency, accuracy, and overall satisfaction with their reloading process. The peace of mind that comes from knowing your powder charge settings are locked in and precise is invaluable.

Where to Acquire Your RCBS Quick Change Metering Cylinders

To maximize your reloading efficiency and elevate the precision of your handloads, the RCBS 98845 Quick Change Metering Cylinder Multi-Caliber is an essential upgrade. These indispensable components are readily available to help you streamline your reloading process and ensure consistent, accurate ammunition production for all your firearms.

For all your reloading needs, including the full range of RCBS products and these vital Quick Change Metering Cylinders, look no further than DEGuns. As a trusted source for firearms, ammunition, and reloading supplies, DEGuns provides a comprehensive selection and expert support to help you achieve your reloading goals. Enhance your bench and experience the significant benefits of truly efficient and precise powder dispensing today.

Product Specifications & Compatibility

Feature	Description	Benefit
Product Identifier	RCBS Part Number: 98845	Helps in easy identification and reordering.
Compatibility	Designed for RCBS Uniflow Powder Measures (and similar RCBS powder measure bodies)	Seamless integration with existing RCBS reloading setups.
Functionality	Stores pre-set powder charge settings for quick, tool-free changes between calibers or powder types.	Eliminates repetitive adjustments, saving time and increasing efficiency.
Material	Durable, high-quality construction	Ensures longevity and consistent performance over prolonged use.
Type	Multi-Caliber Metering Cylinder	Versatile for a wide range of handgun and rifle calibers.
Ease of Use	Tool-free swap mechanism	Enhances workflow, reduces downtime during caliber changes.
Precision Contribution	Helps maintain consistent powder throws by preserving exact settings for dedicated loads.	Critical for accurate and safe ammunition, improving ballistic consistency.