Product Features & Specifications
Direct Attach Picatinny 1913 Rail Version
"¢ Forward rake gives positive retention when using "œC-clamp" (thumb over bore) method of handguard support
"¢ Works as a rest for supported firing positions
"¢ Slight angle without significant bulk adds just the right amount of relief to the wrist without substantially increasing the girth of the handguard
"¢ Small profile is just enough to get repeatable hand position on weapon for-end
"¢ Innovative patent pending attachment method allows for robust clamping and alignment with minimal hardware and slender accessory size
"¢ Textured in front and back for positive engagement
"¢ Made in the U.S.A. from high quality, impact resistant polymers.
Installation Instructions - Tools needed: T15 Torx Driver (not supplied)
"¢ Insert tool (T15 Torx™ driver) into the screw from under the BCM® Picatinny Handstop
"¢ Push the tool into the screw to extend the Picatinny anchor, making it protrude from the top
"¢ With the Picatinny anchor protruding, slide the BCM® Handstop onto the Picatinny Rail in the desired location
"¢ Push the Handstop against the rail, engaging the Handstop's recoil lug to the intersecting Picatinny rail groove
"¢ With the recoil lug engaged, tighten the screw to snug the anchor (approximately 40 inch-lbs. plus quarter turn,*DO NOT OVER-TIGHTEN*)
"¢ Ensure there is no "œplay" or forward/backward movement once tightened.